Install Modem Smartfren Connex AC 682 UI di Ubuntu

Instal file libwvstreams.deb, libwvstreamsextras.deb, libunicon.deb dan wvdial.deb. File-file tersebut dapat di unduh di sini :

libwvstreams.deb

libwvstreamsextras.deb

libunicon.deb

wvdial.deb

Untuk instal file .deb :
root@marwanto:/home/marwanto#dpkg -i namafile.deb

Langkah berikutnya :

root@marwanto:/home/marwanto# sudo eject /dev/sr0
root@marwanto:/home/marwanto# sudo modprobe   usbserial  vendor=0x19d2  product=0xffdd
root@marwanto:/home/marwanto# sudo wvdialconf

Hasilnya :

Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0   S1   S2   S3   S4   S5   S6   S7  
Modem Port Scan<*1>: S8   S9   S10  S11  S12  S13  S14  S15 
Modem Port Scan<*1>: S16  S17  S18  S19  S20  S21  S22  S23 
Modem Port Scan<*1>: S24  S25  S26  S27  S28  S29  S30  S31 
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: China TeleCom
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: China TeleCom
ttyUSB2<*1>: Speed 9600: AT -- OK
ttyUSB2<*1>: Max speed is 9600; that should be safe.
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

Langkah berikutnya :

root@marwanto:/home/marwanto# sudo gedit /etc/wvdial.conf

Hasilnya muncul jendela wvdial.conf,...isikan sesuai dengan daftar berikut :
[Dialer Smart]
Init = ATZ
Init = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = 1
Modem Type = USB Modem
New PPPD = yes
Phone = #777
Modem = /dev/ttyUSB0
Username = smart
Password = smart
Baud = 9600

Save dan tutup wvdial.conf

Langkah berikutnya :

root@marwanto:/home/marwanto# sudo wvdial smart

Hasilnya :
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT 3100000
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Wed Jul  6 06:54:53 2011
--> Pid of pppd: 1744
--> Using interface ppp0
--> local  IP address ***********
--> remote IP address *********
--> primary   DNS address **********
--> secondary DNS address *********

Sudah siap untuk surfing internet !
Selama menggunakan internet, jendela terminal jangan ditutup !
Untuk mengakhiri sambungan internet tekan tombol Ctrl + C !